Litex dt binding json schema conversions by geertu · Pull Request #6 · litex-hub/linux

geertu · 2021-03-28T10:54:14Z

No description provided.

Original author: Joel Stanley <joel@jms.id.au> Added to linux-on-litex-vexriscv by David Shah <dave@ds0.me> Polling mode support by Antony Pavlov <antonynpavlov@gmail.com> Updated for 32-bit CSRs and 64bit CPUs by Gabriel Somlo <gsomlo@gmail.com> BE fixes & unset-MAC detection by Stafford Horne <shorne@gmail.com> unused 'struct liteeth *priv' warning by kernel test robot <lkp@intel.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Original author: Filip Kokosinski <fkokosinski@internships.antmicro.com> Cleanup, 32-bit CSR, 64-bit CPU update: Gabriel Somlo <gsomlo@gmail.com> Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Original author: Kamil Rakoczy <krakoczy@antmicro.com> Updated for DMA transfers: Maciej Dudek <mdudek@internships.antmicro.com> Clenaup, 32bit CSR, eject support: Gabriel Somlo <gsomlo@gmail.com> Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com> Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Add defconfig for LiteX SoC with RocketChip CPU, LiteETH, LiteSDCard, and optional support for spi-mode SDCard. Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: if possible, replace calls to '_litex_[get|set]_reg()' with the appropriate 'litex_[read|write][8|16|32|64]()'. If the size of a LiteX CSR access can't be determined at compile time, we should make available a set of public 'litex_[get|set]_reg()' methods that add 'BUG_ON(reg_size > sizeof(u64) || reg_size < 1)' on top of the call to '_litex_[get|set]_reg()'.

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

NOTE (gls): this SHOULD work on 32-bit CSRs and/or 64-bit CPUs, but has not been tested under those conditions.

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: still needs register offsets re-calculated based on subreg width!

Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: still needs register offsets re-calculated based on subreg width!

Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

NOTE (gls): this SHOULD work on 32-bit CSRs and/or 64-bit CPUs, but has not been tested under those conditions.

- Fix $id to match file path, - Include spi-controller.yaml, - Document flash subnode, - Add missing "unevaluatedProperties: false", - Fix indentation of example, - Use "spi" from generic node names recommendation, - Add missing #{address,size}-cells to example, - Fix reg property of flash subnode. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Signed-off-by: Robert Winkler <rwinkler@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: still needs register offsets re-calculated based on subreg width!

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

Signed-off-by: Robert Winkler <rwinkler@antmicro.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: still needs register offsets re-calculated based on subreg width!

Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

FIXME: if possible, replace calls to '_litex_[get|set]_reg()' with the appropriate 'litex_[read|write][8|16|32|64]()'. If the size of a LiteX CSR access can't be determined at compile time, we should make available a set of public 'litex_[get|set]_reg()' methods that add 'BUG_ON(reg_size > sizeof(u64) || reg_size < 1)' on top of the call to '_litex_[get|set]_reg()'.

- Drop unneeded "|" from descriptions, - Join single-line descriptions with keyword, - Drop bogus blank lines, - Add missing $ref for non-standard properties, - Fix spelling of "minimum" and "maximum", - Use patternProperties and "type: object" to describe subnodes, - Add missing "additionalProperties: false", - Use "clock-controller" from generic node names recommendation, - Group tuples in reg property in example, - Add missing unit address to subnodes, Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

LiteSDCard does not support the "standard" 1-bit bus width that cards (and the Linux mmc subsystem) both use as a default. As such, the card's bus-width must be set to 4-bit (the only width supported by LiteSDCard) before the very first data transfer occurs (which is typically much earlier than when the Linux mmc subsystem would switch to "wide mode". Also, if we're only supporting one bus width, there's no point in storing it as a variable in the "litex_mmc_host" data structure. Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

mmc_alloc_host() initializes max_[req,seg]_size = PAGE_SIZE, max_blk_size = 512, and max_blk_count accordingly (to PAGE_SIZE/512 = 8). For now, litex_mmc experiences DMA timeout errors when attempting cmd18 multi-block transfers, so we force max_blk_count = 1 and re-calculate max_[req|seg]_size accordingly. FIXME: This requires further investigation!!! Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Instead, add to the parsed capabilities using the '|=' operator. FIXME: for now, MMC_CAP_NEEDS_POLL is set manually rather than by setting "broken-cd" in DTS. Further investigation (and possibly implementation of IRQs) is needeed to make a final determination of what the right approach is in this situation. Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Enable MMC_[READ|WRITE]_MULTIPLE_BLOCK commands to work properly in the driver, by ensuring each occurrence is followed up by a cmd-12 (MMC_STOP_TRANSMISSION). FIXME: need to figure out if there's a "canonical" way to tell the core mmc subsystem to issue these commands for us automatically, rather than having to hard-code the behavior in the driver ourselves! Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

Convert the LiteX GPIO controller Device Tree binding documentation to json-schema. - Add SPDX license, - Document missing properties, - Document GPIO hogs, - Fix reg properties in examples, which are always built with #{address,size}-cells = <1>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- The original file didn't contain license information, so I used the most popular/recommended one for DT bindings. I listed the original author of the bindings as maintainer. Interrupt support is not included, as this is not yet supported by the Linux driver.

test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: 51c66ad ("powerpc/bpf: Implement extended BPF on PPC32") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/757acccb7fbfc78efa42dcf3c974b46678198905.1669278887.git.christophe.leroy@csgroup.eu

The offset addition could overflow and pass the used size check given an attribute with very large size (e.g., 0xffffff7f) while parsing MFT attributes. This could lead to out-of-bound memory R/W if we try to access the next attribute derived by Add2Ptr(attr, asize) [ 32.963847] BUG: unable to handle page fault for address: ffff956a83c76067 [ 32.964301] #PF: supervisor read access in kernel mode [ 32.964526] #PF: error_code(0x0000) - not-present page [ 32.964893] PGD 4dc01067 P4D 4dc01067 PUD 0 [ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6 [ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110 [ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a [ 32.968101] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283 [ 32.968364] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f [ 32.968651] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8 [ 32.968963] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f [ 32.969249] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000 [ 32.969870] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170 [ 32.970655] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000 [ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.971378] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0 [ 32.972098] Call Trace: [ 32.972842] <TASK> [ 32.973341] ni_enum_attr_ex+0xda/0xf0 [ 32.974087] ntfs_iget5+0x1db/0xde0 [ 32.974386] ? slab_post_alloc_hook+0x53/0x270 [ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0 [ 32.975115] ntfs_fill_super+0x5d6/0x12a0 [ 32.975336] get_tree_bdev+0x175/0x270 [ 32.975709] ? put_ntfs+0x150/0x150 [ 32.975956] ntfs_fs_get_tree+0x15/0x20 [ 32.976191] vfs_get_tree+0x2a/0xc0 [ 32.976374] ? capable+0x19/0x20 [ 32.976572] path_mount+0x484/0xaa0 [ 32.977025] ? putname+0x57/0x70 [ 32.977380] do_mount+0x80/0xa0 [ 32.977555] __x64_sys_mount+0x8b/0xe0 [ 32.978105] do_syscall_64+0x3b/0x90 [ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 32.979311] RIP: 0033:0x7fdab72e948a [ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 32.981251] RSP: 002b:00007ffd15b87588 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 32.981832] RAX: ffffffffffffffda RBX: 0000557de0aaf060 RCX: 00007fdab72e948a [ 32.982234] RDX: 0000557de0aaf260 RSI: 0000557de0aaf2e0 RDI: 0000557de0ab7ce0 [ 32.982714] RBP: 0000000000000000 R08: 0000557de0aaf280 R09: 0000000000000020 [ 32.983046] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000557de0ab7ce0 [ 32.983494] R13: 0000557de0aaf260 R14: 0000000000000000 R15: 00000000ffffffff [ 32.984094] </TASK> [ 32.984352] Modules linked in: [ 32.984753] CR2: ffff956a83c76067 [ 32.985911] ---[ end trace 0000000000000000 ]--- [ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110 [ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a [ 32.988232] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283 [ 32.988532] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f [ 32.988916] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8 [ 32.989356] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f [ 32.989994] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000 [ 32.990415] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170 [ 32.991011] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000 [ 32.991524] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.991936] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0 This patch adds an overflow check Signed-off-by: edward lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] #6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] #7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] #8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] #9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <minoura@valinux.co.jp> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Cc: Trond Myklebust <trondmy@hammerspace.com> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

…ata and not linked with libtraceevent When we have a perf.data file with tracepoints, such as: # perf evlist -f probe_perf:lzma_decompress_to_file # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by trying to find an evsel with a NULL 'event_name' variable: (gdb) run report --stdio -f Starting program: /root/bin/perf report --stdio -f Program received signal SIGSEGV, Segmentation fault. 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830 warning: Source file is more recent than executable. 2830 if (event_name[0] == '%') { Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64 (gdb) bt #0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830 #1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976 #2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193 #3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227 #4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381 #5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608 #6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596 #7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330 #8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384 #9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428 #10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562 (gdb) So check if we have tracepoint events in add_dynamic_entry() and bail out instead: # perf report --stdio -f This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file Error: Unknown --sort key: `trace' # Fixes: 378ef0f ("perf build: Use libtraceevent from the system") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Check carefully on root debugfs available when destroying vgpu, e.g in remove case drm minor's debugfs root might already be destroyed, which led to kernel oops like below. Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14 BUG: kernel NULL pointer dereference, address: 0000000000000150 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6 Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022 RIP: 0010:__lock_acquire+0x5e2/0x1f90 Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0 RSP: 0018:ffff9f770274f948 EFLAGS: 00010046 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire+0xbf/0x2b0 ? simple_recursive_removal+0xa5/0x2b0 ? lock_release+0x13d/0x2d0 down_write+0x2a/0xd0 ? simple_recursive_removal+0xa5/0x2b0 simple_recursive_removal+0xa5/0x2b0 ? start_creating.part.0+0x110/0x110 ? _raw_spin_unlock+0x29/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt] intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt] intel_vgpu_release_dev+0xe/0x20 [kvmgt] device_release+0x30/0x80 kobject_put+0x79/0x1b0 device_release_driver_internal+0x1b8/0x230 bus_remove_device+0xec/0x160 device_del+0x189/0x400 ? up_write+0x9c/0x1b0 ? mdev_device_remove_common+0x60/0x60 [mdev] mdev_device_remove_common+0x22/0x60 [mdev] mdev_device_remove_cb+0x17/0x20 [mdev] device_for_each_child+0x56/0x80 mdev_unregister_parent+0x5a/0x81 [mdev] intel_gvt_clean_device+0x2d/0xe0 [kvmgt] intel_gvt_driver_remove+0x2e/0xb0 [i915] i915_driver_remove+0xac/0x100 [i915] i915_pci_remove+0x1a/0x30 [i915] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x1b8/0x230 unbind_store+0xd8/0x100 kernfs_fop_write_iter+0x156/0x210 vfs_write+0x236/0x4a0 ksys_write+0x61/0xd0 do_syscall_64+0x55/0x80 ? find_held_lock+0x2b/0x80 ? lock_release+0x13d/0x2d0 ? up_read+0x17/0x20 ? lock_is_held_type+0xe3/0x140 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fc9b2c9e0c4 Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4 RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001 RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30 R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00 </TASK> Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm_multipath kvmgt mdev vfio_iommu_type1 vfio kvm irqbypass i915 nvme e1000e igb nvme_core crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic serio_raw ghash_clmulni_intel sha512_ssse3 dca drm_buddy intel_gtt video wmi drm_display_helper ttm CR2: 0000000000000150 ---[ end trace 0000000000000000 ]--- Cc: Wang Zhi <zhi.a.wang@intel.com> Cc: He Yu <yu.he@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Tested-by: Yu He <yu.he@intel.com> Fixes: bc7b0be ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-2-zhenyuw@linux.intel.com

In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are two flags attemting to guard connector polling: poll_enabled and poll_running. While poll_enabled semantics is clearly defined and fully adhered (mark that drm_kms_helper_poll_init() was called and not finalized by the _fini() call), the poll_running flag doesn't have such clearliness. This flag is used only in drm_helper_probe_single_connector_modes() to guard calling of drm_kms_helper_poll_enable, it doesn't guard the drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling is actually running. Tie HPD enablement to this flag. This fixes the following warning reported after merging the HPD series: Hot plug detection already enabled WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm] Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6 Hardware name: NXP i.MX8MQ EVK (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_bridge_hpd_enable+0x94/0x9c [drm] lr : drm_bridge_hpd_enable+0x94/0x9c [drm] sp : ffff800009ef3740 x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000 x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000 x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0 x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006 x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260 x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000 x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744 x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011 x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000 Call trace: drm_bridge_hpd_enable+0x94/0x9c [drm] drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper] drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper] drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper] drm_client_modeset_probe+0x204/0x1190 [drm] __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper] drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper] drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper] drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper] dcss_kms_attach+0x1c8/0x254 [imx_dcss] dcss_drv_platform_probe+0x90/0xfc [imx_dcss] platform_probe+0x70/0xcc really_probe+0xc4/0x2e0 __driver_probe_device+0x80/0xf0 driver_probe_device+0xe0/0x164 __device_attach_driver+0xc0/0x13c bus_for_each_drv+0x84/0xe0 __device_attach+0xa4/0x1a0 device_initial_probe+0x1c/0x30 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xd0 process_one_work+0x200/0x474 worker_thread+0x74/0x43c kthread+0xfc/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Fixes: c826879 ("drm/probe-helper: enable and disable HPD on connectors") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-2-dmitry.baryshkov@linaro.org (cherry picked from commit d33a54e) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

When --overwrite and --max-size options of perf record are used together, a segmentation fault occurs. The following is an example: # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1 [ perf record: Woken up 1 times to write data ] perf: Segmentation fault Obtained 12 stack frames. ./perf/perf(+0x197673) [0x55f99710b673] /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f] ./perf/perf(+0x8eb40) [0x55f997002b40] ./perf/perf(+0x1f6882) [0x55f99716a882] ./perf/perf(+0x794c2) [0x55f996fed4c2] ./perf/perf(+0x7b7c7) [0x55f996fef7c7] ./perf/perf(+0x9074b) [0x55f99700474b] ./perf/perf(+0x12e23c) [0x55f9970a223c] ./perf/perf(+0x12e54a) [0x55f9970a254a] ./perf/perf(+0x7db60) [0x55f996ff1b60] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86] ./perf/perf(+0x7dfe9) [0x55f996ff1fe9] Segmentation fault (core dumped) backtrace of the core file is as follows: (gdb) bt #0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234 #1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242 #2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263 #3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618 #4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658, from=from@entry=0) at util/synthetic-events.c:1895 #5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658) at util/synthetic-events.c:1905 #6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997 #7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802 #8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258 #9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330 #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384 #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428 #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562 The reason is that record__bytes_written accesses the freed memory rec->thread_data, The process is as follows: __cmd_record -> record__free_thread_data -> zfree(&rec->thread_data) // free rec->thread_data -> record__synthesize -> perf_event__synthesize_id_index -> process_synthesized_event -> record__write -> record__bytes_written // access rec->thread_data We add a member variable "thread_bytes_written" in the struct "record" to save the data size written by the threads. Fixes: 6d57581 ("perf record: Add support for limit perf output file size") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization Fixes: 58b0991 ("mptcp: create msk early") Cc: stable@vger.kernel.org Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#347 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by Christoph after having refactored the passive socket initialization, the mptcp listener shutdown path is prone to an UaF issue. BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0 Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266 CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 kasan_check_range+0x14a/0x1a0 _raw_spin_lock_bh+0x73/0xe0 subflow_error_report+0x6d/0x110 sk_error_report+0x3b/0x190 tcp_disconnect+0x138c/0x1aa0 inet_child_forget+0x6f/0x2e0 inet_csk_listen_stop+0x209/0x1060 __mptcp_close_ssk+0x52d/0x610 mptcp_destroy_common+0x165/0x640 mptcp_destroy+0x13/0x80 __mptcp_destroy_sock+0xe7/0x270 __mptcp_close+0x70e/0x9b0 mptcp_close+0x2b/0x150 inet_release+0xe9/0x1f0 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The msk grace period can legitly expire in between the last reference count dropped in mptcp_subflow_queue_clean() and the later eventual access in inet_csk_listen_stop() After the previous patch we don't need anymore special-casing msk listener socket cleanup: the mptcp worker will process each of the unaccepted msk sockets. Just drop the now unnecessary code. Please note this commit depends on the two parent ones: mptcp: refactor passive socket initialization mptcp: use the workqueue to destroy unaccepted sockets Fixes: 6aeed90 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#346 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 6930bcb dropped the setting of the file_lock range when decoding a nlm_lock off the wire. This causes the client side grant callback to miss matching blocks and reject the lock, only to rerequest it 30s later. Add a helper function to set the file_lock range from the start and end values that the protocol uses, and have the nlm_lock decoder call that to set up the file_lock args properly. Fixes: 6930bcb ("lockd: detect and reject lock arguments that overflow") Reported-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Tested-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org #6.0 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

@icur

In xfs_buffered_write_iomap_begin, @icur is the iext cursor for the data fork and @CCur is the cursor for the cow fork. Pass in whichever cursor corresponds to allocfork, because otherwise the xfs_iext_prev_extent call can use the data fork cursor to walk off the end of the cow fork structure. Best case it returns the wrong results, worst case it does this: stack segment: 0000 [#1] PREEMPT SMP CPU: 2 PID: 3141909 Comm: fsstress Tainted: G W 6.3.0-rc2-xfsx #6.3.0-rc2 7bf5cc2e98997627cae5c930d890aba3aeec65dd Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014 RIP: 0010:xfs_iext_prev+0x71/0x150 [xfs] RSP: 0018:ffffc90002233aa8 EFLAGS: 00010297 RAX: 000000000000000f RBX: 000000000000000e RCX: 000000000000000c RDX: 0000000000000002 RSI: 000000000000000e RDI: ffff8883d0019ba0 RBP: 989642409af8a7a7 R08: ffffea0000000001 R09: 0000000000000002 R10: 0000000000000000 R11: 000000000000000c R12: ffffc90002233b00 R13: ffff8883d0019ba0 R14: 989642409af8a6bf R15: 000ffffffffe0000 FS: 00007fdf8115f740(0000) GS:ffff88843fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdf8115e000 CR3: 0000000357256000 CR4: 00000000003506e0 Call Trace: <TASK> xfs_iomap_prealloc_size.constprop.0.isra.0+0x1a6/0x410 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c] xfs_buffered_write_iomap_begin+0xa87/0xc60 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c] iomap_iter+0x132/0x2f0 iomap_file_buffered_write+0x92/0x330 xfs_file_buffered_write+0xb1/0x330 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c] vfs_write+0x2eb/0x410 ksys_write+0x65/0xe0 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Found by xfs/538 in alwayscow mode, but this doesn't seem particular to that test. Fixes: 590b165 ("xfs: refactor xfs_iomap_prealloc_size") Actually-Fixes: 66ae56a ("xfs: introduce an always_cow mode") Signed-off-by: Darrick J. Wong <djwong@kernel.org>

Sai Krishna says: ==================== octeontx2: Miscellaneous fixes This patchset includes following fixes. Patch #1 Fix for the race condition while updating APR table Patch #2 Fix end bit position in NPC scan config Patch #3 Fix depth of CAM, MEM table entries Patch #4 Fix in increase the size of DMAC filter flows Patch #5 Fix driver crash resulting from invalid interface type information retrieved from firmware Patch #6 Fix incorrect mask used while installing filters involving fragmented packets Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction, IPV6 filed hash configuration. Patch #8 Fix for NPC hardware parser configuration destination address hash, IPV6 endianness issues. Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware. Patch #10 Fix disabling packet I/O in case of mailbox timeout. Patch #11 Fix detaching LF resources in case of VF probe fail. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

In thread__comm_len(),strlen() is called outside of the thread->comm_lock critical section,which may cause a UAF problems if comm__free() is called by the process_thread concurrently. backtrace of the core file is as follows: (gdb) bt #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 #1 0x000055ad15d31de5 in thread__comm_len (thread=0x7f627d20e300) at util/thread.c:320 #2 0x000055ad15d4fade in hists__calc_col_len (h=0x7f627d295940, hists=0x55ad1772bfe0) at util/hist.c:103 #3 hists__calc_col_len (hists=0x55ad1772bfe0, h=0x7f627d295940) at util/hist.c:79 #4 0x000055ad15d52c8c in output_resort (hists=hists@entry=0x55ad1772bfe0, prog=0x0, use_callchain=false, cb=cb@entry=0x0, cb_arg=0x0) at util/hist.c:1926 #5 0x000055ad15d530a4 in evsel__output_resort_cb (evsel=evsel@entry=0x55ad1772bde0, prog=prog@entry=0x0, cb=cb@entry=0x0, cb_arg=cb_arg@entry=0x0) at util/hist.c:1945 #6 0x000055ad15d53110 in evsel__output_resort (evsel=evsel@entry=0x55ad1772bde0, prog=prog@entry=0x0) at util/hist.c:1950 #7 0x000055ad15c6ae9a in perf_top__resort_hists (t=t@entry=0x7ffcd9cbf4f0) at builtin-top.c:311 #8 0x000055ad15c6cc6d in perf_top__print_sym_table (top=0x7ffcd9cbf4f0) at builtin-top.c:346 #9 display_thread (arg=0x7ffcd9cbf4f0) at builtin-top.c:700 #10 0x00007f6282fab4fa in start_thread (arg=<optimized out>) at pthread_create.c:443 #11 0x00007f628302e200 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 The reason is that strlen() get a pointer to a memory that has been freed. The string pointer is stored in the structure comm_str, which corresponds to a rb_tree node,when the node is erased, the memory of the string is also freed. In thread__comm_len(),it gets the pointer within the thread->comm_lock critical section, but passed to strlen() outside of the thread->comm_lock critical section, and the perf process_thread may called comm__free() concurrently, cause this segfault problem. The process is as follows: display_thread process_thread -------------- -------------- thread__comm_len -> thread__comm_str # held the comm read lock -> __thread__comm_str(thread) # release the comm read lock thread__delete # held the comm write lock -> comm__free -> comm_str__put(comm->comm_str) -> zfree(&cs->str) # release the comm write lock # The memory of the string pointed to by comm has been free. -> thread->comm_len = strlen(comm); This patch expand the critical section range of thread->comm_lock in thread__comm_len(), to make strlen() called safe. Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yunfeng Ye <yeyunfeng@huawei.com> Link: https://lore.kernel.org/r/322bfb49-840b-f3b6-9ef1-f9ec3435b07e@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a report of a msan failure like below: $ sudo perf lock con -ab -- sleep 1 ... ==224416==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x5651160d6c96 in lock_contention_read util/bpf_lock_contention.c:290:8 #1 0x565115f90870 in __cmd_contention builtin-lock.c:1919:3 #2 0x565115f90870 in cmd_lock builtin-lock.c:2385:8 #3 0x565115f03a83 in run_builtin perf.c:330:11 #4 0x565115f03756 in handle_internal_command perf.c:384:8 #5 0x565115f02d53 in run_argv perf.c:428:2 #6 0x565115f02d53 in main perf.c:562:3 #7 0x7f43553bc632 in __libc_start_main #8 0x565115e865a9 in _start It was because the 'key' variable is not initialized. Actually it'd be set by bpf_map_get_next_key() but msan didn't seem to understand it. Let's make msan happy by initializing the variable. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230324001922.937634-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Seen in "perf stat --bpf-counters --for-each-cgroup test" running in a container: libbpf: Failed to bump RLIMIT_MEMLOCK (err = -1), you might need to do it explicitly! libbpf: Error in bpf_object__probe_loading():Operation not permitted(1). Couldn't load trivial BPF program. Make sure your kernel supports BPF (CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough value. libbpf: failed to load object 'bperf_cgroup_bpf' libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -1 Failed to load cgroup skeleton #0 0x55f28a650981 in list_empty tools/include/linux/list.h:189 #1 0x55f28a6593b4 in evsel__exit util/evsel.c:1518 #2 0x55f28a6596af in evsel__delete util/evsel.c:1544 #3 0x55f28a89d166 in bperf_cgrp__destroy util/bpf_counter_cgroup.c:283 #4 0x55f28a899e9a in bpf_counter__destroy util/bpf_counter.c:816 #5 0x55f28a659455 in evsel__exit util/evsel.c:1520 #6 0x55f28a6596af in evsel__delete util/evsel.c:1544 #7 0x55f28a640d4d in evlist__purge util/evlist.c:148 #8 0x55f28a640ea6 in evlist__delete util/evlist.c:169 #9 0x55f28a4efbf2 in cmd_stat tools/perf/builtin-stat.c:2598 #10 0x55f28a6050c2 in run_builtin tools/perf/perf.c:330 #11 0x55f28a605633 in handle_internal_command tools/perf/perf.c:384 #12 0x55f28a6059fb in run_argv tools/perf/perf.c:428 #13 0x55f28a6061d3 in main tools/perf/perf.c:562 Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230410205659.3131608-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…us union field If bperf (perf tools that use BPF skels) sets evsel->leader_skel or evsel->follower_skel then it appears that evsel->bpf_skel is set and can trigger the following use-after-free: ==13575==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000014080 at pc 0x55684b939880 bp 0x7ffdfcf30d70 sp 0x7ffdfcf30d68 READ of size 8 at 0x60c000014080 thread T0 #0 0x55684b93987f in sample_filter_bpf__destroy tools/perf/bpf_skel/sample_filter.skel.h:44:11 #1 0x55684b93987f in perf_bpf_filter__destroy tools/perf/util/bpf-filter.c:155:2 #2 0x55684b98f71e in evsel__exit tools/perf/util/evsel.c:1521:2 #3 0x55684b98a352 in evsel__delete tools/perf/util/evsel.c:1547:2 #4 0x55684b981918 in evlist__purge tools/perf/util/evlist.c:148:3 #5 0x55684b981918 in evlist__delete tools/perf/util/evlist.c:169:2 #6 0x55684b887d60 in cmd_stat tools/perf/builtin-stat.c:2598:2 .. 0x60c000014080 is located 0 bytes inside of 128-byte region [0x60c000014080,0x60c000014100) freed by thread T0 here: #0 0x55684b780e86 in free compiler-rt/lib/asan/asan_malloc_linux.cpp:52:3 #1 0x55684b9462da in bperf_cgroup_bpf__destroy tools/perf/bpf_skel/bperf_cgroup.skel.h:61:2 #2 0x55684b9462da in bperf_cgrp__destroy tools/perf/util/bpf_counter_cgroup.c:282:2 #3 0x55684b944c75 in bpf_counter__destroy tools/perf/util/bpf_counter.c:819:2 #4 0x55684b98f716 in evsel__exit tools/perf/util/evsel.c:1520:2 #5 0x55684b98a352 in evsel__delete tools/perf/util/evsel.c:1547:2 #6 0x55684b981918 in evlist__purge tools/perf/util/evlist.c:148:3 #7 0x55684b981918 in evlist__delete tools/perf/util/evlist.c:169:2 #8 0x55684b887d60 in cmd_stat tools/perf/builtin-stat.c:2598:2 ... previously allocated by thread T0 here: #0 0x55684b781338 in calloc compiler-rt/lib/asan/asan_malloc_linux.cpp:77:3 #1 0x55684b944e25 in bperf_cgroup_bpf__open_opts tools/perf/bpf_skel/bperf_cgroup.skel.h:73:35 #2 0x55684b944e25 in bperf_cgroup_bpf__open tools/perf/bpf_skel/bperf_cgroup.skel.h:97:9 #3 0x55684b944e25 in bperf_load_program tools/perf/util/bpf_counter_cgroup.c:55:9 #4 0x55684b944e25 in bperf_cgrp__load tools/perf/util/bpf_counter_cgroup.c:178:23 #5 0x55684b889289 in __run_perf_stat tools/perf/builtin-stat.c:713:7 #6 0x55684b889289 in run_perf_stat tools/perf/builtin-stat.c:949:8 #7 0x55684b888029 in cmd_stat tools/perf/builtin-stat.c:2537:12 Resolve by clearing 'evsel->bpf_skel' as part of bpf_counter__destroy(). Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20230411051718.267228-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In the function ieee80211_tx_dequeue() there is a particular locking sequence: begin: spin_lock(&local->queue_stop_reason_lock); q_stopped = local->queue_stop_reasons[q]; spin_unlock(&local->queue_stop_reason_lock); However small the chance (increased by ftracetest), an asynchronous interrupt can occur in between of spin_lock() and spin_unlock(), and the interrupt routine will attempt to lock the same &local->queue_stop_reason_lock again. This will cause a costly reset of the CPU and the wifi device or an altogether hang in the single CPU and single core scenario. The only remaining spin_lock(&local->queue_stop_reason_lock) that did not disable interrupts was patched, which should prevent any deadlocks on the same CPU/core and the same wifi device. This is the probable trace of the deadlock: kernel: ================================ kernel: WARNING: inconsistent lock state kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G W kernel: -------------------------------- kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes: kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40 kernel: {IN-SOFTIRQ-W} state was registered at: kernel: lock_acquire+0xc7/0x2d0 kernel: _raw_spin_lock+0x36/0x50 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm] kernel: ieee80211_queue_skb+0x450/0x730 [mac80211] kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211] kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211] kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211] kernel: dev_hard_start_xmit+0xb5/0x260 kernel: __dev_queue_xmit+0xdbe/0x1200 kernel: neigh_resolve_output+0x166/0x260 kernel: ip_finish_output2+0x216/0xb80 kernel: __ip_finish_output+0x2a4/0x4d0 kernel: ip_finish_output+0x2d/0xd0 kernel: ip_output+0x82/0x2b0 kernel: ip_local_out+0xec/0x110 kernel: igmpv3_sendpack+0x5c/0x90 kernel: igmp_ifc_timer_expire+0x26e/0x4e0 kernel: call_timer_fn+0xa5/0x230 kernel: run_timer_softirq+0x27f/0x550 kernel: __do_softirq+0xb4/0x3a4 kernel: irq_exit_rcu+0x9b/0xc0 kernel: sysvec_apic_timer_interrupt+0x80/0xa0 kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30 kernel: _raw_spin_unlock_irqrestore+0x3f/0x70 kernel: free_to_partial_list+0x3d6/0x590 kernel: __slab_free+0x1b7/0x310 kernel: kmem_cache_free+0x52d/0x550 kernel: putname+0x5d/0x70 kernel: do_sys_openat2+0x1d7/0x310 kernel: do_sys_open+0x51/0x80 kernel: __x64_sys_openat+0x24/0x30 kernel: do_syscall_64+0x5c/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc kernel: irq event stamp: 5120729 kernel: hardirqs last enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120 kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120 kernel: softirqs last enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: other info that might help us debug this: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&local->queue_stop_reason_lock); kernel: <Interrupt> kernel: lock(&local->queue_stop_reason_lock); kernel: *** DEADLOCK *** kernel: 8 locks held by kworker/5:0/25656: kernel: #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530 kernel: #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530 kernel: #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #3: ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #4: ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #5: ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #6: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm] kernel: #7: ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm] kernel: stack backtrace: kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G W 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022 kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211] kernel: Call Trace: kernel: <TASK> kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: dump_stack_lvl+0x5f/0xa0 kernel: dump_stack+0x14/0x20 kernel: print_usage_bug.part.46+0x208/0x2a0 kernel: mark_lock.part.47+0x605/0x630 kernel: ? sched_clock+0xd/0x20 kernel: ? trace_clock_local+0x14/0x30 kernel: ? __rb_reserve_next+0x5f/0x490 kernel: ? _raw_spin_lock+0x1b/0x50 kernel: __lock_acquire+0x464/0x1990 kernel: ? mark_held_locks+0x4e/0x80 kernel: lock_acquire+0xc7/0x2d0 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ? ftrace_return_to_handler+0x8b/0x100 kernel: ? preempt_count_add+0x4/0x70 kernel: _raw_spin_lock+0x36/0x50 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: ? prepare_ftrace_return+0xc5/0x190 kernel: ? ftrace_graph_func+0x16/0x20 kernel: ? 0xffffffffc02ab0b1 kernel: ? lock_acquire+0xc7/0x2d0 kernel: ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm] kernel: ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211] kernel: ? __rcu_read_lock+0x4/0x40 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_free+0x55/0x130 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi] kernel: ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi] kernel: ? mutex_lock_nested+0x4/0x30 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_stop_device+0x78/0xd0 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: __iwl_mvm_mac_start+0x114/0x210 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: iwl_mvm_mac_start+0x76/0x150 [iwlmvm] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: drv_start+0x79/0x180 [mac80211] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_reconfig+0x1523/0x1ce0 [mac80211] kernel: ? synchronize_net+0x4/0x50 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: ieee80211_restart_work+0x108/0x170 [mac80211] kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: process_one_work+0x250/0x530 kernel: ? ftrace_regs_caller_end+0x66/0x66 kernel: worker_thread+0x48/0x3a0 kernel: ? __pfx_worker_thread+0x10/0x10 kernel: kthread+0x10f/0x140 kernel: ? __pfx_kthread+0x10/0x10 kernel: ret_from_fork+0x29/0x50 kernel: </TASK> Fixes: 4444bc2 ("wifi: mac80211: Proper mark iTXQs for resumption") Link: https://lore.kernel.org/all/1f58a0d1-d2b9-d851-73c3-93fcc607501c@alu.unizg.hr/ Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/all/cdc80531-f25f-6f9d-b15f-25e16130b53a@alu.unizg.hr/ Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: tag, or it goes automatically? Link: https://lore.kernel.org/r/20230425164005.25272-1-mirsad.todorovac@alu.unizg.hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>

…ting Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d5 ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== mlxsw: Cleanups in router code This patchset moves some router-related code from spectrum.c to spectrum_router.c where it should be. It also simplifies handlers of netevent notifications. - Patch #1 caches router pointer in a dedicated variable. This obviates the need to access the same as mlxsw_sp->router, making lines shorter, and permitting a future patch to add code that fits within 80 character limit. - Patch #2 moves IP / IPv6 validation notifier blocks from spectrum.c to spectrum_router, where the handlers are anyway. - In patch #3, pass router pointer to scheduler of deferred work directly, instead of having it deduce it on its own. - This makes the router pointer available in the handler function mlxsw_sp_router_netevent_event(), so in patch #4, use it directly, instead of finding it through mlxsw_sp_port. - In patch #5, extend mlxsw_sp_router_schedule_work() so that the NETEVENT_NEIGH_UPDATE handler can use it directly instead of inlining equivalent code. - In patches #6 and #7, add helpers for two common operations involving a backing netdev of a RIF. This makes it unnecessary for the function mlxsw_sp_rif_dev() to be visible outside of the router module, so in patch #8, hide it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== mlxsw: Preparations for out-of-order-operations patches The mlxsw driver currently makes the assumption that the user applies configuration in a bottom-up manner. Thus netdevices need to be added to the bridge before IP addresses are configured on that bridge or SVI added on top of it. Enslaving a netdevice to another netdevice that already has uppers is in fact forbidden by mlxsw for this reason. Despite this safety, it is rather easy to get into situations where the offloaded configuration is just plain wrong. As an example, take a front panel port, configure an IP address: it gets a RIF. Now enslave the port to a bridge, and the RIF is gone. Remove the port from the bridge again, but the RIF never comes back. There is a number of similar situations, where changing the configuration there and back utterly breaks the offload. Over the course of the following several patchsets, mlxsw code is going to be adjusted to diminish the space of wrongly offloaded configurations. Ideally the offload state will reflect the actual state, regardless of the sequence of operation used to construct that state. No functional changes are intended in this patchset yet. Rather the patches prepare the codebase for easier introduction of functional changes in later patchsets. - In patch #1, extract a helper to join a RIF of a given port, if there is one. In patch #2, use it in a newly-added helper to join a LAG interface. - In patches #3, #4 and #5, add helpers that abstract away the rif->dev access. This will make it simpler in the future to change the way the deduction is done. In patch #6, do this for deduction from nexthop group info to RIF. - In patch #7, add a helper to destroy a RIF. So far RIF was destroyed simply by kfree'ing it. - In patch #8, add a helper to check if any IP addresses are configured on a netdevice. This helper will be useful later. - In patch #9, add a helper to migrate a RIF. This will be a convenient place to put extensions later on. - Patch #10 move IPIP initialization up to make ipip_ops_arr available earlier. ==================== Link: https://lore.kernel.org/r/cover.1686581444.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says: ==================== mlxsw: Maintain candidate RIFs The mlxsw driver currently makes the assumption that the user applies configuration in a bottom-up manner. Thus netdevices need to be added to the bridge before IP addresses are configured on that bridge or SVI added on top of it. Enslaving a netdevice to another netdevice that already has uppers is in fact forbidden by mlxsw for this reason. Despite this safety, it is rather easy to get into situations where the offloaded configuration is just plain wrong. As an example, take a front panel port, configure an IP address: it gets a RIF. Now enslave the port to the bridge, and the RIF is gone. Remove the port from the bridge again, but the RIF never comes back. There is a number of similar situations, where changing the configuration there and back utterly breaks the offload. The situation is going to be made better by implementing a range of replays and post-hoc offloads. This patch set lays the ground for replay of next hops. The particular issue that it deals with is that currently, driver-specific bookkeeping for next hops is hooked off RIF objects, which come and go across the lifetime of a netdevice. We would rather keep these objects at an entity that mirrors the lifetime of the netdevice itself. That way they are at hand and can be offloaded when a RIF is eventually created. To that end, with this patchset, mlxsw keeps a hash table of CRIFs: candidate RIFs, persistent handles for netdevices that mlxsw deems potentially interesting. The lifetime of a CRIF matches that of the underlying netdevice, and thus a RIF can always assume a CRIF exists. A CRIF is where next hops are kept, and when RIF is created, these next hops can be easily offloaded. (Previously only the next hops created after the RIF was created were offloaded.) - Patches #1 and #2 are minor adjustments. - In patches #3 and #4, add CRIF bookkeeping. - In patch #5, link CRIFs to RIFs such that given a netdevice-backed RIF, the corresponding CRIF is easy to look up. - Patch #6 is a clean-up allowed by the previous patches - Patches #7 and #8 move next hop tracking to CRIFs No observable effects are intended as of yet. This will be useful once there is support for RIF creation for netdevices that become mlxsw uppers, which will come in following patch sets. ==================== Link: https://lore.kernel.org/r/cover.1687438411.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

…l/git/netfilter/nf Florisn Westphal says: ==================== These are netfilter fixes for the *net* tree. First patch resolves a false-positive lockdep splat: rcu_dereference is used outside of rcu read lock. Let lockdep validate that the transaction mutex is locked. Second patch fixes a kdoc warning added in previous PR. Third patch fixes a memory leak: The catchall element isn't disabled correctly, this allows userspace to deactivate the element again. This results in refcount underflow which in turn prevents memory release. This was always broken since the feature was added in 5.13. Patch 4 fixes an incorrect change in the previous pull request: Adding a duplicate key to a set should work if the duplicate key has expired, restore this behaviour. All from myself. Patch #5 resolves an old historic artifact in sctp conntrack: a 300ms timeout for shutdown_ack. Increase this to 3s. From Xin Long. Patch #6 fixes a sysctl data race in ipvs, two threads can clobber the sysctl value, from Sishuai Gong. This is a day-0 bug that predates git history. Patches 7, 8 and 9, from Pablo Neira Ayuso, are also followups for the previous GC rework in nf_tables: The netlink notifier and the netns exit path must both increment the gc worker seqcount, else worker may encounter stale (free'd) pointers. ================ Signed-off-by: David S. Miller <davem@davemloft.net>

user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 712f4aa ("unix: properly account for FDs passed over unix sockets") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

shenki and others added 30 commits March 26, 2021 20:21

LiteX: add defconfig files for linux-on-litex-rocket design

e8c460f

Add defconfig for LiteX SoC with RocketChip CPU, LiteETH, LiteSDCard, and optional support for spi-mode SDCard. Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

LiteX: driver for LiteGPIO interface

15ca79a

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

LiteX: driver for I2CMaster

401938f

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for I2CMaster")

0b372a1

NOTE (gls): this SHOULD work on 32-bit CSRs and/or 64-bit CPUs, but has not been tested under those conditions.

LiteX: driver for XADC hwmon

fb24472

Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for XADC hwmon")

66d8a9e

FIXME: still needs register offsets re-calculated based on subreg width!

LiteX: driver for PWM

2b4bc43

Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for PWM")

e75f40e

FIXME: still needs register offsets re-calculated based on subreg width!

LiteX: driver for SPI Flash (mtd) device

eff5664

Signed-off-by: Daniel Craviee <dcraviee@internships.antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for SPI Flash (mtd) device")

e1e96eb

NOTE (gls): this SHOULD work on 32-bit CSRs and/or 64-bit CPUs, but has not been tested under those conditions.

LiteX: driver for ICAPBitstream fpga manager

464aaee

Signed-off-by: Robert Winkler <rwinkler@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for ICAPBitstream fpga manager")

1de2b5e

FIXME: still needs register offsets re-calculated based on subreg width!

LiteX: support for VexRiscV interrupt controller

36c0889

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

LiteX: driver for LiteVideo

1398ca7

Signed-off-by: Robert Winkler <rwinkler@antmicro.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

fixup over ("LiteX: driver for LiteVideo")

e79fccc

FIXME: still needs register offsets re-calculated based on subreg width!

LiteX: driver for MMCM

33f271c

Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com> FIXME: not updated or tested for 32-bit CSR data width, 64-bit CPU (gls)

litex-mmc: ensure probe fails with appropriate code & log message

95fec2e

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>

litex_mmc: align internal error checks to hw. "event register" layout

8aeb062

Navigation Menu

Repository navigation

Litex dt binding json schema conversions - #6

Litex dt binding json schema conversions#6
geertu wants to merge 31 commits into
litex-hub:masterfrom
geertu:litex-dt-binding-json-schema-conversions

geertu commented Mar 28, 2021

Uh oh!

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

8 participants

Conversation

geertu commented Mar 28, 2021

Uh oh!

Reviewers

Uh oh!

Assignees

Labels

Projects

Milestone

Development

Uh oh!

8 participants