Skip to content

Create new land only initial conditions (ongoing) #2403

Closed as not planned
Closed as not planned

Description

@wwieder

As we move to CTSM5.2 datasets and introduce CLM6_0 physics options, it seems like it would also be helpful to provide new initial conditions files. @dlawrenncar noted, this may be most important for coupled model simulations, so we can provide more realistic land states in F and B cases as we move forward with CESM3 development runs.

Given very high productivity biases in CRU-JRA forced runs, I'd suggest we provide 1850 initial conditions forced with GSWP3 using CTSM5.2 surface data. It may be most straight forward to do this after #2348 comes to main?

Looking through the LMWG-Dev issues, I don't think we have a GSWP3 forced run that's similar to this case, #54, do we @olyson? If not, we can create a new issue on LWMG-Dev for this.

We should make sure that isotopes (e.g. see #3311), tillage, and residue removal are all on for these spin ups.

Definition of done:

  • Decide on which LND_TUNING_MODES will have initial conditions (clm5_0_GSWP3, clm6_0_CRUJRA, clm5_0_cam6, clm6_0_cam7?)
  • Which resolutions will be run? ne30pg3, f09, f19, f45? What about NEON sites?
  • Run all the configurations needed
  • Preliminary finidat file in place for clm5_1/clm6_0 all forcing options: lnd/clm2/initdata_esmf/ctsm5.2/clmi.I1850Clm60BgcCrop-ciso.1361-01-01.ne30pg3_mg17_c240317.nc
  • Put files in place and in XML and into a tag

Activity

  1. ekluzek commented on Mar 6, 2024

    @ekluzek
    Contributor

    Since, this requires CTSM5.2 it actually should wait for #2372. If we need it sooner it could be added to CESM3_dev. But, I'd like to avoid that if we can. This was also on the CTSM5.2 board as a post-5.2 activity, so I'm linking this there.

    Also this relates to #554, so linking it here.

  2. olyson commented on Mar 6, 2024

    @olyson
    Contributor

    @wwieder and I discussed this and thought that we could just clone the most recent deadveg branch simulation and switch from CRUJRA to GSWP3. In that recent simulation, tillage and residue removal was on. And I have been using CTSM5.2 surface datasets, i.e., for that run I used

    /glade/campaign/cesm/cesmdata/cseg/inputdata/lnd/clm2/surfdata_esmf/ctsm5.2.0/surfdata_0.9x1.25_hist_78pfts_CMIP6_1850_c230517.nc

    I know that @slevis-lmwg has recently re-generated all of the datasets, so I was planning to use that version which appears to be:

    /glade/campaign/cesm/cesmdata/cseg/inputdata/lnd/clm2/surfdata_esmf/ctsm5.2.0/surfdata_0.9x1.25_hist_1850_78pfts_c240216.nc

    Is there another reason to wait for #2372 ?

  3. ekluzek commented on Mar 6, 2024

    @ekluzek
    Contributor

    Nope that makes perfect sense @olyson. Better to not have to wait when you don't have to.

  4. olyson commented on Mar 6, 2024

    @olyson
    Contributor
  5. olyson commented on Mar 6, 2024

    @olyson
    Contributor

    I initially set this up as an f09 (1deg) simulation, but I think it should actually be an ne30 since we'll use it as initial conditions for the ne30 F- and B-cases coming up. I don't think the finidat interpolation will handle going from 1deg to ne30. Is that a correct assumption @ekluzek and @billsacks ?

  6. ekluzek commented on Mar 6, 2024

    @ekluzek
    Contributor

    @olyson it should be fine to interpolate from f09 to ne30np4.pg3 grid. The interpolation is just nearest neighbor so it will work between any type of grid.

    But, I agree that we should spinup the land with the workhorse ne30 grid rather than f09. We'll interpolate to f09 from it for the land only simulations.

  7. billsacks commented on Mar 7, 2024

    @billsacks
    Member

    I agree with @ekluzek .

  8. olyson commented on Mar 17, 2024

    @olyson
    Contributor

    Here is an ne30 spunup initial file for 1850 with configuration as noted above:

    /glade/campaign/cgd/tss/people/oleson/CLM5_restarts/ctsm51_ctsm51d166deadveg_ne30pg3ne30pg3mg17_GSWP3V1_ABsnoCDE_blk_A5BCD_1850pAD.clm2.r.1361-01-01-00000.nc

  9. wwieder commented on Mar 18, 2024

    @wwieder
    ContributorAuthor

    Thanks @olyson should this be the default finidat file we point to for simulations with 'modern' tags? Here I'm especially thinking about the CESM alpha (or beta) 17 tag that's upcoming?

  10. olyson commented on Mar 18, 2024

    @olyson
    Contributor

    Yes, I think it will be suitable for the upcoming CESM tags.

  11. wwieder commented on May 8, 2024

    @wwieder
    ContributorAuthor

    @ekluzek and @slevis-lmwg, can we make it so this initial conditions file is used out of the box with the next round of coupled model experiments?

    /glade/campaign/cgd/tss/people/oleson/CLM5_restarts/ctsm51_ctsm51d166deadveg_ne30pg3ne30pg3mg17_GSWP3V1_ABsnoCDE_blk_A5BCD_1850pAD.clm2.r.1361-01-01-00000.nc

  12. wwieder commented on May 8, 2024

    @wwieder
    ContributorAuthor

    looking at the project board, I wonder if this should come in with #2492, or actually #2501?

  13. 66 remaining items

  14. wwieder commented on Oct 8, 2024

    @wwieder
    ContributorAuthor

    I think we're just expecting to provide 1850 ICs for the f19 grid at this point, Keith. Thanks for posting its location here.

  15. slevis-lmwg commented on Oct 14, 2024

    @slevis-lmwg
    Contributor

    I'm preparing to merge #2821, and I'm leaving this issue open, in case there are loose ends to tie here.

  16. moved this from In Progress to Done in LMWG: Sprint Planning Boardon Oct 14, 2024
  17. wwieder commented on Nov 6, 2024

    @wwieder
    ContributorAuthor

    We'll get to do this again (and again) over the next few months. I feel like we should close this for now? Will put this as next to see what others think?

  18. added
    nextthis should get some attention in the next week or two. Normally each Thursday SE meeting.
    on Nov 6, 2024
  19. changed the title [-]Create new land only initial conditions[/-] [+]Create new land only initial conditions (ongoing)[/+] on Nov 7, 2024
  20. removed
    nextthis should get some attention in the next week or two. Normally each Thursday SE meeting.
    on Nov 7, 2024
  21. added theissue type on Aug 13, 2025
  22. wwieder commented on Jan 22, 2026

    @wwieder
    ContributorAuthor

    This is ongong with no definition of done. Mostly falls into compset definitions

  23. moved this from On the grill (work in progress) to Ready to eat (Done!) in CTSM-CLM6 development highlightson Jan 22, 2026
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Labels

enhancementnew capability or improved behavior of existing capabilitypriority: highHigh priority to fix/merge soon, e.g., because it is a problem in important configurations

Type

Projects

Relationships

None yet

Development

No branches or pull requests

Issue actions